OptiSigns player is tested and supported on Raspberry Pi 5.
Overall the performance is very smooth.
Our engineers are working on a prebuilt image, but in the mean time, you can use Raspberry Pi 5 OS Stock 64 bits image and set up OptiSigns to run on it.
Here are the steps:
1. Download Raspberry Pi Imager
Run it and install Raspberry Pi OS 64 bit on your SDCard.
2. Boot up & connect to WiFi & and download/copy OptiSigns ARM64 AppImage to your Raspberry Pi
Once Downloaded, open File Explorer, right click on the downloaded file and select Properties.
In the Properties box.Click Permissions tabThe in the Access Control -> Execute drop down. Select AnyoneThen Click OK.
3. Install Fuse (required to run AppImage program on your RPi)
Open Terminal and run:
sudo apt-get install fuse libfuse2
4. Double click on the optisigns-arm64.AppImage file to execute it.In the pop up, select Execute.
It make take a few seconds to load. The app will run and generate a pairing code for you to pair with the app.optisigns.com portal.You can also move the mouse around and see the top 3 buttons to resize, open side bar menu or close the app.
On the side menu, you can set Orientation, etc.
To make sure OptiSigns start in full screen.
Select "Override Resolution"
Change to: 0, 0, 1920, 1080 like below.
Change resolution to 1920x1080, you can run in 4K it's fine for most cases, but we recommend 1080p for better performance.
That's all, you have successfully set up OptiSigns Player on your Raspberry Pi 5.
Set resolution to 1920x1080 and OptiSigns autostart when device reboot.
You can pair your screen and start using it.
If you have issues or need further help, please feel free to reach out.