OptiSigns Pre-Configure Android Device - Getting Started Guide

You've just received your OptiSigns Pre-Configure Android Stick Device?

Here's a quickstart guide to get it set up.

1) Connect cables & power:

Please use the cables & adapter come with the box to minimize issues

mceclip0.png

After connecting all cables and plug in power, the device will take a moment for first boot.
If you have entered your WiFi information when you ordered your device, you can skip to step 3 and start assigning content.

2) (Optional) Connect to your network:

If you have entered WiFi info when ordering the device, you can skip this step)

If you see the below message: "Internet connection required for first time" you will need to connect the device to your network.

Screenshot_20210323-030250.png

To configure your WiFi now, press the back button on the remote until you get to the home page(hold the back button for 3 seconds will get to home page directly). Then click the Setting button on the home page, a side menu will open to allow you to configure WiFi.

mceclip1.png

In the Network & Internet, select your WiFi network, and then enter your WiFi password. Now you will be connected to Internet. 

mceclip2.png

 

If you order un-provisioned device (the device will not be automatically provisioned to your account because you order as guest, or you just chose to order un-provisioned device).
The device will generate a Pairing code, like below, and you can log in to https://app.optisigns.com click Add Screen to Pair the device. For more detail refer to this article.

mceclip1.png

3) Assign content to your device:

Your pre-configured device will be in "Ordered Devices" folder of your screens management page.

https://app.optisigns.com/app/screenManagement

mceclip2.png

To assign content Click Edit

mceclip3.png

Click the Type drop down list and select Playlist & Select the Playlist you want to use. If you haven't create a playlist yet, you can use the Simple Playlist that was automatically created with your account.

mceclip4.png

Click Save

 

That's all! Congratulation, you have set up your Pre-configured Android Stick Device.

If you have questions please don't hesitate to contact us at support@optisigns.com 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.